ITEM 6220141332 - 36" x 240"
McNICHOLS® Bar Grating brings safety, strength, durability, and character when installed in either industrial or architectural applications. It regularly appears on catwalks, factory floors, platforms, railing infill panels, and Stair Treads. A series of bearing bars are welded, swage locked, or press locked with perpendicular crossbars to form the panels. Bar Grating is a rugged, high-performance, low-maintenance and slip-resistant product capable of handling pedestrian or vehicular loads.
The following selections are important considerations to help you choose the right McNICHOLS® Bar Grating product for your project or application. Please specify:
Consider Bar Grating uses and physical requirements for your interior or exterior application. Loading, span and support needs as well as traffic requirements such as pedestrian, hand cart, and vehicular are important considerations. Several Bar Grating products comply with the Americans with Disabilities Act (ADA) when installed to written standards. We invite you to browse Bar Grating applications in our Gallery.
Choose from Welded, Heavy-Duty Welded, Swage-Locked, Press-Locked, or Clinched construction types.
Determine the series type and name (GW-100, GHB-150, GAL-125, etc.) of the Bar Grating product for your project. Items that comply with the Americans with Disabilities Act (ADA) standard will have this language indicated in the item description of the applicable product.
Select the product spacing (the measurement from the center of one bearing bar to the center of an adjacent bearing bar) of the Bar Grating item. Product Spacing (e.g. 19-W-4) refers to the industry specification for Bar Grating products. For example, the first number refers to the bearing bar spacing measured on center (19 = 19/16" or 1-3/16"), the letter refers to the construction type (W = welded), and the last number references the cross bar spacing measured on center (4 = 4").
Select the primary material type including Aluminum, Carbon Steel, Carbon Steel - Powder Coated Black, Galvanized Steel, or Stainless Steel. Inventory is typically "mill finish" for Aluminum, Carbon Steel and Stainless Steel. Hot-Dipped Galvanized, Powder Coated Black or Powder Coated Gray finishes are available for many items. We provide more information on Primary Material Types and Product Finishes in the links provided in the Overview section on the Bar Grating Resources landing page.
Choose the bearing bar height and thickness (e.g. 1-1/4" Height x 3/16" Thick) and the shape (Rectangular Bar, I-Bar or T-Bar).
Determine if your application requires a smooth, serrated or grooved product surface.
Choose the percentage of open area desired in the panel or pieces of Bar Grating.
Choose the direction the bearing bars need to run to support the application load. Bearing bar direction is often referred to as span. Clear span refers to the distance in-between Grating supports. Direction of bearing bars is an important installation consideration.
Identify the number of panels (width and length) and/or sizes (cut-to-size pieces, areas, Stair Treads) and cut types (random, uniform, equal stub). Areas exceeding standard panel widths are provided in multiple pieces to width.
Specify any requirements such as fabrication, banding, notching, cut-outs, toeboards, Stair Treads, non-standard tolerances, etc.
Determine if Bar Grating Accessories like Clips or Fasteners/Hardware, Carrier Plates, etc. are needed for your project or application.
View additional McNICHOLS® Bar Grating Resources on tolerances, conversions, available sizes, and more!
Helpful Bar Grating reference guides to save, print, or share!
McNICHOLS® AccessoriesFastener, Galvanized, Hot Dipped, Type CB Saddle Clip (Hardware Available Separately)
McNICHOLS® AccessoriesFastener, Galvanized, Hot Dipped, Type GG1E Saddle Clip (Hardware Integral with Saddle Clip)
McNICHOLS® AccessoriesFlat Bar, Carbon Steel, Hot Rolled, 1/4" Gauge (.2500" Thick), Flat Bar (2" Width)
McNICHOLS® AccessoriesFlat Bar, Carbon Steel, Hot Rolled, 1/4" Gauge (.2500" Thick), Flat Bar (5-1/2" Width)
McNICHOLS® AccessoriesFlat Bar, Carbon Steel, Hot Rolled, 1/4" Gauge (.2500" Thick), Flat Bar (5" Width)
McNICHOLS® AccessoriesNosing, Aluminum, Aluminum Alloy, .3125" Thick (5/16" Gauge), Cast Abrasive Nosing (1-1/4" Width)
McNICHOLS® AccessoriesNosing, Carbon Steel, Hot Rolled, 1/8" Gauge (.1250" Thick), Checkered Plate Angle Nosing (1-1/4" Leg x 1-1/4" Leg)
McNICHOLS® AccessoriesNosing, Carbon Steel, Hot Rolled, 1/8" Gauge (.1250" Thick), Checkered Plate Angle Nosing (1-1/4" Leg x 1-3/4" Leg)
McNICHOLS® AccessoriesCarrier Plates - Bar Grating, Carbon Steel, Hot Rolled, 3/16" Gauge (.1875" Thick), Stair Tread Carrier Plates - Pair (3" Height x 9-3/4" Width)
McNICHOLS® AccessoriesCarrier Plates - Bar Grating, Carbon Steel, Hot Rolled, 3/16" Gauge (.1875" Thick), Stair Tread Carrier Plates - Pair (3" Height x 12-1/8" Width)
McNICHOLS® AccessoriesCarrier Plates - Bar Grating, Carbon Steel, Hot Rolled, 3/16" Gauge (.1875" Thick), Stair Tread Carrier Plates - Pair (3" Height x 10-15/16" Width)
McNICHOLS® AccessoriesCarrier Plates - Bar Grating, Carbon Steel, Hot Rolled, 3/16" Gauge (.1875" Thick), Stair Tread Carrier Plates - Pair (3" Height x 8-9/16" Width)
McNICHOLS® Bar Grating