McNICHOLS® Perforated Metal - Slotted
At McNICHOLS, you can choose from the largest inventory of Perforated Metal products in North America. Available in a variety of hole sizes and percentages of open area, with aesthetic appeal plus a high strength-to-weight ratio, Perforated Metal is used for sound enclosures, partitions, sign panels, machine guards, screening, filters, and more. Perforated hole types include Round, Square, Slotted, Hexagonal, and Designer. Materials include Aluminum, Carbon Steel (Plain Steel), Galvanized Steel, Stainless Steel, and Plastic.
The following selections are important considerations to help you choose the right McNICHOLS® Perforated Metal product for your project or application. Please specify:
Product applications/uses include displays, exhibits, fixtures, partitions, cabinet inserts, guards, furniture, building facades, infill panels, screening, sign panels, filters, baskets, ventilation, security enclosures, and more. We invite you to browse Perforated Metal applications in our Product Gallery.
Choose from a wide variety of Round, Square, Slotted, Hexagonal, or Designer Perforated hole types.
Primary Material / Product Finish
Select primary material type including Aluminum, Carbon Steel, Galvanized Steel, Stainless Steel, or Plastic, taking into consideration climate or environmental realities. Inventory is typically “mill finish” unless otherwise specified. We provide our full selection of materials in the Materials, Finishes, Gauges/Thicknesses section.
Material Guage / Thickness
Decide on material gauge number or thickness in inches. The Gauges and Weights Chart offers additional information.
Identify hole size (diameter), hole type (shape), hole center (spacing) and hole arrangement (staggered, straight row, etc.), or Designer Perforated name/pattern.
Percent Open Area
Choose the percentage of open area desired in the Perforated Metal sheet or coil.
Margin / End Pattern
Specify solid margin preferences on width and/or length of sheet if required for your application. Most inventory 11 Gauge and lighter has minimum solid side margins running the length of the sheet and no end margins running the width of the sheet (material ends are sheared through). Sheets heavier than 11 Gauge typically have either a finished or unfinished pattern with corresponding end margins.
Product Size, Form & Quantity
Identify product size(s), form (typically supplied in sheets), and quantity desired, including cut-to-size pieces.
Specify any requirements for special cut-to-size pieces, margin or edge treatments, finishing, leveling, fabrication, non-standard tolerances, etc.
Determine if Perforated Metal Accessories such as Angle, Flat Bar or U-Edging framing solutions are required for your application.
View McNICHOLS® Perforated Metal Resources on tolerances, types, available sizes, and more!
- Specifying & Ordering Perforated Metal
- Primary Material Types
- Product Finishes
- Common Fractions & Decimal / Millimeter Equivalents
- Hole Types, Arrangements, Patterns & Margins
- Perforated Metal Flatness Tolerances
- Perforated Metal Standard Tolerances
- Perforated Metal Hole Types to Scale
Helpful McNICHOLS® Perforated Metal tables to save, print, or share!
- Gauges, Thicknesses & Weights by Primary Material | 26 Gauge to 1/2” Thick
- Round Hole & Square Hole Percentages of Open Area
- 8 Results
Slotted, Aluminum, Alloy 3003-H14, .0630" Thick (14 Gauge), 1/8" x 1" Round End Slot, Side Staggered, 44% Open Area
Slotted, Carbon Steel, Cold Rolled, 16 Gauge (.0598" Thick), 1/8" x 1" Round End Slot, Side Staggered, 44% Open Area
Designer Perforated, MOIRE, Carbon Steel, Cold Rolled, 22 Gauge (.0299" Thick), 1/8" x 3/4" Round End Slot, Side Staggered, 43% Open Area
Designer Perforated, AIRLINE, Carbon Steel, Cold Rolled, 16 Gauge (.0598" Thick), 68% Open Area
Designer Perforated, MOIRE, Aluminum, Alloy 3003-H14, .0320" Thick (20 Gauge), 1/8" x 3/4" Round End Slot, Side Staggered, 43% Open Area
Designer Perforated, AIRLINE, Aluminum, Alloy 3003-H14, .0630" Thick (14 Gauge), 68% Open Area
Slotted, Carbon Steel, Cold Rolled, 22 Gauge (.0299" Thick), 0.200" x 0.637" Square End Slot, Straight Centers, 71% Open Area