DURAGRID® Pultruded Wide T-Bar Fiberglass Grating panels are corrosion, slip resistant and fire retardant. We offer three series choices of bearing bar spacings – 1.85 inch (MS T-1200), 2 inch (MS T- 1800) and 2.62 inch (MS T-3800). This measurement is the center to center of the bar-spacing between each bearing bar. White or gray, 12 or 20 foot polyester panels are available from stock with a 1 inch bearing bar height. (Bearing bar and cross bar colors may differ.) Other options are available by special order. ADA compliant options. For a less-wide T-bar requirement, we offer the MS T-1720, and 5000 Series shown in the previous product section.
Unidirectional strength and stiffness
T-Bar configuration
Load bearing capabilities
Variety of bar sizes and spacings
Variety of panel widths and lengths
Variety of resins and colors
Fire retardant choices
Corrosion resistance
Chemical resistance
Low conductivity
Choice of smooth or grit surface
Pedestrian friendly
Durable
Lightweight
Low maintenance
Easily fabricated
Range of open areas
ADA compatible choice
VGB Act compliant choices
The bearing bar spacing is measured from the center of one bearing bar to the center of the next. The bearing bar spacing varies according to the T-Bar series type.
· MS T-1800 Series has a 2.00 inch bearing bar spacing.
· MS T-1000 Series has a 1.80 inch bearing bar spacing.
The cross bar spacing is the distance between the cross bars. The cross bars are the fiberglass rods that hold the larger bearing bars together. The standard cross bar spacing is 6 inches. A 12 inch cross bar spacing is available by special order.
Quantity is the number of full panels or pieces you will need. McNICHOLS will quote you on the exact quantity you specify and inform you if minimum quantities apply.
Perforated
Grating
Expanded
Matting and Flooring
Wire Mesh
Structural Shapes
Ladder Rungs
Stair Treads
Stair Tread Covers
Handrail Components
Accessories
Designer Textured Metals
Trench Drain
Major Material
Features
Hide product(s)
