DURADEK® and DURAGRID® Pultruded Fiberglass Gratings, with T-bar shaped configurations, are known for their comfortable walking surface attained through the wide-surface bearing bar. Grating is corrosion and slip resistant, has 6 inch cross bar spacing and is made in a fire retardant polyester resin. We offer two series choices of bearing bar spacings – 2 inch (MS T-1720) and 2 inch (MS T-5020). This measurement is the center to center of the bar-spacing between each bearing bar. Panels are available from stock in bar in yellow or gray. For a wider T-bar requirement, we offer the MS T-1200, 1800 and 3800 Series in the next product section.
You may narrow your selection choices by using the left navigation pane or clicking on an image below.
Unidirectional strength and stiffness
T-Bar configuration
Load bearing capabilities
Variety of bar sizes and spacings
Variety of panel widths and lengths
Variety of resins and colors
Fire retardant choices
Corrosion resistance
Chemical resistance
Low conductivity
Choice of smooth or grit surface
Pedestrian friendly
Durable
Lightweight
Low maintenance
Easily fabricated
Range of open areas
ADA compatible choice
VGB Act compliant choices
The bearing bar spacing is measured from the center of one bearing bar to the center of the next. The bearing bar spacing varies according to the T-Bar series type.
· MS T-5000 Series has a 2.00 inch bearing bar spacing.
· MS T-3300 Series has a 1.50 inch bearing bar spacing.
The cross bar spacing is the distance between the cross bars. The cross bars are the fiberglass rods that hold the larger bearing bars together. The standard cross bar spacing is 6 inches. A 12 inch cross bar spacing is available by special order.
Quantity is the number of full panels or pieces you will need. McNICHOLS will quote you on the exact quantity you specify and inform you if minimum quantities apply.