Glossary

The size of the straight portion of an Elbow from the point it completes its bend angle.

The size of the straight portion of an Elbow from the point it completes its bend angle

Metal sheets with a rolled, 3-dimensional pattern.

Describes the method by which polymer resins are cured. The resins, which are liquids, harden when exposed to heat.

Pultruded Fiberglass Grating is available in both "I-Bar" and "T-Bar" shapes, both of which incorporate a top and bottom flange.   This term refers to the space  between the top flange of adjacent bearing bars.

 This term refers to the width of the top flange of the pultruded bar used for the grating.

A name or designation used to identify and distinguish a commercial product or service from others in the same field, also called brand name. These will typically, although not always, be identified by a Trademark.

A pre-cast drainage system or individual components designed specifically for a trench application.

The number of the component that serves as the inlet end cap on a trench drain system.

The number of the component that serves as the inlet end cap on a trench drain system.

The number of the component that is known as a locking device for a trench drain system.

This identifies the number or type of the Ternch Drain Kit. Each kit contains a different quantity and type of components.

Bar grating panels, pieces, or trenches can be banded or have a flat metal bar welded to the ends of the bearing bars. A Trim Band is one where the flat metal bar is welded at every 4 to 6 bearing bars. Trim banding is commonly used for pedestrian traffic applications where loading is not a factor.

The overall length of a 1/2" Diameter Solid Round Bar U Bend.

A hollow round, square or rectangular structural shape.